null

Sony / Vizio RUNTK5261TPZE (CPWBX5261TPZE) T-Con Board

SKU:
sj-RUNTK5261TPZE
AUD$81.25
(You save AUD$38.51)
AUD$42.74
AUD$81.25
(You save AUD$38.51)
AUD$42.74
180-Day Warranty
We highly recommend matching your part number. Learn more

❄ HOLIDAY SALE! SAVE 10% WITH THE CODE SJHOLIDAY24 ❄

Look for the ZE stamped on the board. A firmware update is required with this board when installed in Sony models. Please follow instructions on this page.

IMPORTANT: The following picture symptoms indicate a bad LCD panel, and NOT a bad T-con board:

-One side of the picture is darker than the other
-Picture has horizontal line(s)
-A dark, cloudy spot spreads across the picture

Installing a new T-con board in a panel with one of the defects above will result in damaging the new board.

IMPORTANT: Horizontal lines on the screen are virtually NEVER caused by a bad T-con board. Horizontal lines indicate a defective LCD panel (screen).



Known Models

BrandModelsVersions
SONYKDL-60EX645
VIZIOE601I-A3
Part Number:
RUNTK5261TPZE
Warranty:
180-Day Warranty
Board Manufacturer:
Sharp
Board Number:
CPWBX5261TPZE
Manufacturer Part Number 1:
Sharp RUNTK5261TPZE
Notes:
ShopJimmy recommends ordering by part number whenever possible. Often times there are TV models that use more than one set of parts and/or panels.
Part Type:
T-Con
Part Usage:
LED/LCD
TV Panel Manufacturer:
Sharp
TV Sizes:
60
Models:
KDL-60EX645
Models:
E601I-A3
Brands:
sony
Brands:
vizio
Panel Number:
JE600D3LC2N

Videos

What is a T-con board?

A T-con board — short for “timing control board” or “timing controller” — is found in LED and LCD TVs. This board converts the video signal from the main board and sends it directly to the screen to display the signal in the correct order and at the correct spot on the screen.

Which symptoms does a T-con board fix in a TV?

•  If your TV has no video, then the T-con board could be bad.

•  If your TV only has video on a fourth or half of the screen, then the T-con board could be bad.

*These are helpful tips to get you started and don’t represent accurate diagnoses for every TV model and failure. If you’re unsure of your diagnosis, we recommend checking out our YouTube channel or reaching out to a local TV technician for assistance.

How easy is it to replace a T-con board?

It's easy! Once you match the part number on your T-con board with the part number listed on this page to confirm compatibility, you’ll just need a screwdriver and the ability to remove the back of your TV and replace the board.