null

Sony 1-014-109-11 (HV650QUBF9K 44-97719930 44-97719060) T-CON Board

SKU:
sj-1-014-109-11
AUD$27.45
AUD$27.45
180-Day Warranty
Ships same business day if ordered before 4pm CT!
We highly recommend matching your part number. Learn more

IMPORTANT: Horizontal lines on the screen are virtually NEVER caused by a bad T-con board. Horizontal lines indicate a defective LCD panel (screen).
THERE MAY OR MAY NOT BE A CONNECTOR AT CN2.



Known Models

BrandModelsVersions
SONYKD65X80K
KD65X80CK
KD-65X80K
KD-65X80CK
PHILIPS65PFL4864/F7WXA7
65PUL7552/F7
Part Number:
1-014-109-11
Warranty:
180-Day Warranty
Brands:
sony
Harmonized Code:
8539.32.00.40
Models:
KD65X80K
Models:
KD65X80CK
Notes:
ShopJimmy recommends ordering by part number whenever possible. Often times there are TV models that use more than one set of parts and/or panels.
Part Type:
T-Con
Part Usage:
LED/LCD
Models:
KD-65X80K
Brands:
philips
Manufacturer Part Number 1:
Sony 1-014-109-11|Philips UPBTCNBEG006
Models:
65PFL4864/F7W
Models:
65PUL7552/F7
Models:
KD-65X80CK
Board Number:
24W4B| HV650QUBF9K| 44-97719930| HV650QUB F9K V01| 47 6021573|44-97719060|44-9772121

Videos

What is a T-con board?

A T-con board — short for “timing control board” or “timing controller” — is found in LED and LCD TVs. This board converts the video signal from the main board and sends it directly to the screen to display the signal in the correct order and at the correct spot on the screen.

Which symptoms does a T-con board fix in a TV?

•  If your TV has no video, then the T-con board could be bad.

•  If your TV only has video on a fourth or half of the screen, then the T-con board could be bad.

*These are helpful tips to get you started and don’t represent accurate diagnoses for every TV model and failure. If you’re unsure of your diagnosis, we recommend checking out our YouTube channel or reaching out to a local TV technician for assistance.

How easy is it to replace a T-con board?

It's easy! Once you match the part number on your T-con board with the part number listed on this page to confirm compatibility, you’ll just need a screwdriver and the ability to remove the back of your TV and replace the board.