We recommend matching the part number on your original part with the part number listed on this page to ensure compatibility.
While matching your model number is a great start, many models use variations of each part and they're not always interchangeable.
We include brief instructions in red text on some listings (also displayed below without the red font). Please look for these instructions to confirm any important info that you'll need to identify on your original part. Additionally, we highlight the part number in our photos.
Please don't hesitate to contact us with any questions. We're here to help!
PLEASE NOTE: This repair is recommended only for experienced technicians. After installing these LED bars, we strongly encourage you to perform the modification on the power supply board in your TV (BN44-00873C) that can be seen here: https://youtu.be/R_KuCkW1SO4\r\nReplace resistors R9111 & R9211 as shown in the video with the included resistors from ShopJimmy.\r\nAfter this modification is done, the LED bars will run much cooler than the stock ones and will prolong their lifespan significantly.\r\n\r\nBrand new set of two bars with double-sided tape already applied.\r\n\r\nPLEASE NOTE: If AFTER installing these new bars you experience flickering on one or both bars, or only one bar is working this is indicative of a failure on the power supply. We suggest replacing the power supply or if you are an experienced technician we offer a repair kit for this issue . https://www.shopjimmy.com/samsung-bn44-00873c-power-supply-component-repair-kit.htm ---PLEASE NOTE: This repair is recommended only for experienced technicians. After installing these LED bars, we strongly encourage you to perform the modification on the power supply board in your TV (BN44-00873C) that can be seen here: https://youtu.be/R_KuCkW1SO4
Replace resistors R9111 & R9211 as shown in the video with the included resistors from ShopJimmy.
After this modification is done, the LED bars will run much cooler than the stock ones and will prolong their lifespan significantly.
Brand new set of two bars with double-sided tape already applied.
PLEASE NOTE: If AFTER installing these new bars you experience flickering on one or both bars, or only one bar is working this is indicative of a failure on the power supply. We suggest replacing the power supply or if you are an experienced technician we offer a repair kit for this issue . https://www.shopjimmy.com/samsung-bn44-00873c-power-supply-component-repair-kit.htm---
Samsung BN96-44814A SEC 65 2X54 3030C LED Backlight Bars (2) UN65MU6290VXZA NEW
Brand | Models | Versions |
---|
Samsung | UN65MU6290VXZA | GA01 |
---|